Print Settings - Konica Minolta bizhub 4000P User Manual

Print Settings

Setup menu
Use
Printer Language
PCL Emulation
PS Emulation
PPDS Emulation
Print Area
Normal
Whole Page
Download Target
Flash
User's Guide
To
Set the default printer language.
Notes:
• PCL Emulation is the factory default setting.
• PostScript emulation uses a PostScript interpreter for
processing print jobs.
• PCL Emulation uses a PCL interpreter for processing print
jobs.
• Setting a printer language default does not prevent a
software program from sending print jobs that use another
printer language.
Set the logical and physical printable area.
Notes:
• Normal is the factory default setting. When attempting to
print data in the non-printable area defined by the Normal
setting, the printer clips the image at the boundary.
• Whole Page allows the image to be moved into the non-
printable area defined by the Normal setting. This setting
affects only pages printed using a PCL 5e interpreter and
has no effect on pages printed using the PCL XL or
PostScript interpreter.
Set the storage location for downloads.
Notes:
• Storing downloads in a flash memory places them in
permanent storage. Downloads remain in the flash
memory even when the printer is turned off.
• This menu item appears only when a flash option is
installed.
- 113 -