Setup Field(S) - Motorola Symbol LS4208 Product Reference Manual

Setup Field(s)

Setup Field(s) Definitions
Table 14-1
Parameter
Move Cursor
Move Cursor to a Character
Move Cursor to Start of Data
Move Cursor Past a Character
Skip Ahead "N" Characters
Skip Back "N" Characters
Send Preset Value
Description
Scan the Move Cursor To Character
on page 14-24, then any printable ASCII
character from the Alphanumeric
When this is used, the cursor moves to the
position after the matching character. If the
character is not there, the rule fails and ADF
tries the next rule.
Scan this bar code to move cursor to the
beginning of the data.
This parameter moves the cursor past all
sequential occurrences of a selected character.
For example, if the selected character is 'A,'
then the cursor moves past 'A,' 'AA,' 'AAA,' etc.
Scan the Move Cursor Past Character
on page 14-24, then select a character from the
Alphanumeric Keyboard. If the character is not
there, the cursor does not move (i.e., has no
effect).
Scan one of these bar codes to select the
desired number of positions to move the cursor
ahead.
Scan one of these bar codes to select the
desired number of positions to move the cursor
back.
Send prefix and/or suffix value by scanning the
appropriate bar code. These values must be set
using the Scan Prefix and Scan Suffix bar codes
on page 13-4.
Advanced Data Formatting 14 - 23
Page
bar code 14-24
Keyboard.
14-24
14-24
bar code
14-25
14-27
14-28