12 - 32 Symbol LS4208 Product Reference Guide
Clear Transmission Buffer
To clear the transmission buffer, scan the Clear Buffer bar code below, which contains only a start character, a
dash (minus), and a stop character.
•
The scanner issues a short high/low/high beep.
•
The scanner erases the transmission buffer.
•
No transmission occurs.
Clear Buffer
Because the Clear Buffer contains only the dash (minus) character, set the Code 39 length
NOTE
to include length 1 before scanning this bar code.
Transmit Buffer
There are two methods to transmit the Code 39 buffer.
Scan the Transmit Buffer bar code below which contains only a start character, a plus (+), and a stop
1.
character.
• The scanner transmits and clears the buffer.
• The scanner issues a low/high beep.
Scan a Code 39 bar code with a leading character other than a space.
2.
• The scanner appends new decode data to buffered data.
• The scanner transmits and clears the buffer.
• The scanner signals that the buffer was transmitted with a low/high beep.
• Scanner transmits and clears the buffer.
Because the Transmit Buffer contains only a plus (+) character, set the Code 39 length to
NOTE
include length 1 before scanning this bar code.
Transmit Buffer