Configuration Overview - Dell 948 User Manual

User guide

Table of Contents

Wireless Networking

6. Select I Agree with the terms of this license agreement, and then click Next.

7. Read the Firewall Exception information, and then click Next.

8. Connect the USB cable between the port on the back of the printer and the port on the back of the computer.

9. On the Configure Your Wireless Printer Adapter dialog box, select Create or modify the printer's wireless

settings, and then click Next.

Follow the instructions on your screen. For more information about configuring your adapter to work on the network,

see

Configuring the Adapter Using the Wireless Setup

NOTE:

The network name (SSID) and the security settings for the wireless network you want to connect to may

be needed to complete this setup wizard. For more information, see the wireless network administrator or your

network documentation.

Connecting the Printer to Another Computer

NOTE:

To perform the following steps, the printer must already be connected to a computer or router through the

wireless network.

1. Make sure your computer is on, and then insert the Drivers and Utilities CD.

2. Select Using a wireless network, and then click Next.

3. Select I Agree with the terms of this license agreement, and then click Next.

4. Read the Firewall Exceptions information, and then click Next.

5. On the Configure Your Wireless Printer Adapter dialog box, select Keep the current wireless settings of the

printer, and then click Next.

6. Choose a port or manually enter an IP address, and then follow the instructions on your screen.

Configuring the Adapter Using the Wireless Setup Utility