Cleaning The Exterior Of The Printer - Dell 948 User Manual

Maintenance
5. Click the Maintenance tab.
6. Click Clean Ink Cartridges.
The cleaning page prints.
7. If the print quality has not improved, click Clean Again.
8. Print your document again to verify the improved print quality.
If you are still not satisfied with the print quality, wipe the nozzles with a clean, dry cloth, and then print your document
again.

Cleaning the Exterior of the Printer

1. Make sure that the printer is turned off and unplugged from the wall outlet.
CAUTION: To avoid the risk of electric shock, unplug the power cord from the wall outlet and
disconnect all cables to the printer before proceeding.
2. Remove paper from the paper support and paper exit tray.
3. Dampen a clean, lint-free cloth with water.
NOTICE:
Do not use household cleaners or detergents, as they may damage the finish of the printer.
4. Wipe only the outside of the printer, making sure to remove any ink residue that has accumulated on the paper exit
tray.
NOTICE: Using a damp cloth to clean the interior may cause damage to your printer. Damage to the printer
caused by not following the correct instructions for cleaning will not be covered under warranty.
5. Make sure the paper support and paper exit tray are dry before beginning a new print job.
Changing the Default Operator Panel Settings
To change the default settings on the operator panel:
1. Turn on the printer.
2. Change the operator panel settings.
3. Use the left and right Arrow buttons
4. Use the left and right Arrow buttons
5. Use the left and right Arrow buttons
6. Use the left and right Arrow buttons
The current settings on the operator panel are saved as the new default settings.
file:///T|/htdocs/systems/prn948/en/en/d0e10317.html[10/10/2012 11:05:35 AM]
to scroll to SETUP, and then press the Select button
to scroll to Defaults, and then press the Select button
to scroll to Set Defaults, and then press the Select button
to scroll to Use Current, and then press the Select button
.
.
.
.