Defaults Menu; Network Setup Options; Network Setup Menu - Dell 948 User Manual

Understanding the Operator Panel Menus
Defaults Options
You can specify your operator panel default settings by selecting Defaults from the Setup menu.

Defaults Menu

From this menu:
Photo Print Size
Set Defaults

Network Setup Options

You can configure your network setup options by selecting Network Setup from the Setup menu.

Network Setup Menu

From this menu:
Print Setup Page
Wireless Setup
TCP/IP Menu
Network Time
Reset Network Adapter to Factory
Defaults
Wireless Setup Menu
From this menu:
Network Name
Wireless Signal Quality
TCP/IP Menu
From this You can:
menu:
file:///T|/htdocs/systems/prn948/en/en/d0e648.html[10/10/2012 11:05:28 AM]
You can:
Specify the size of your photo.
Specify which settings to use for your printer.
Use Current
Use Factory
You can:
Print a list of wireless network settings.
View your wireless setup options.
Network Name
Wireless Signal Quality
Configure TCP/IP setup options.
Enable DHCP
If DHCP is disabled, these items appear on the display:
Set IP Address
Set IP Netmask
Set IP Gateway
If DHCP is enabled, these items appear on the display:
View IP Address
View IP Netmask
View IP Gateway
Allow your printer to update its internal clock according to the time server of your
network.
Enable
Disable
Clear all wireless network settings.
You can:
View the current SSID being used.
NOTE: You cannot change the value of Network Name.
View the current wireless signal strength.