Other Problems - Epson PowerLite Pro Z8150NL User Manual

Hide thumbs Also See for PowerLite Pro Z8150NL:
Table of Contents

Advertisement

Problem Solving

Other problems

The remote control does not work
Check
Is the remote control light-emitting area pointing towards
the remote receiver on the projector when it is operated?
Is the remote control too far from the projector?
Is direct sunlight or strong light from fluorescent lamps
shining onto the Remote Receiver?
Is the correct setting for the remote receiver selected?
Are the batteries dead or have the batteries been inserted
correctly?
Are the remote control ID and the projector ID matched?
Does Remote Control Type match the remote control that
you are using?
Is the optional remote control cable connected to the
remote control or to the projector's Remote port?
Is the remote control button lock set?
Point the remote control towards the remote receiver. s
The operating range for the remote control is about 49 ft (15 m). s
Set the projector up in a location where strong light does not shine onto the remote receiver. Or set the
remote receiver to Off from Remote Receiver in the configuration menu. s Settings Menu - Remote
Receiver
p.65
Check the Remote Receiver from the configuration menu. s Settings Menu - Remote Receiver
Make sure the batteries are inserted correctly or replace the batteries with new ones if necessary.
p.22
s
Make sure the ID for the projector you want to operate and the ID for the remote control match. To
operate all projectors by remote control regardless of the ID setting, set the ID switch on the side of the
remote control to Off. s
p.175
Check the Remote Control Type on the configuration menu. s Extended Menu - Operation -
Remote Control Type
p.67
When the remote control cable is connected, the remote control light-emitting area or the projector's
remote receiver are disabled. When not using the remote control cable set, disconnect it from the
remote control and the Remote port.
When the remote control button lock is set, buttons except for those needed for basic remote control
operations are deactivated. Hold down the [Help] button to cancel the remote control button lock.
p.47
s
Remedy
p.23
p.23
109
p.65

Advertisement

Table of Contents
loading

Table of Contents