Epson PowerLite Pro Z8150NL User Manual page 75

Network Menu
Sub Menu
SSID
Search Access Point
Channel
SSID Display
DHCP
IP Address
Subnet Mask
Gateway Address
IP Address Display
Region Code
Enter an SSID. When an SSID is provided for the wireless WLAN network in which the projector participates, enter the SSID.
You can enter up to 32 single-byte alphanumeric characters.
When Connection Mode is set to Advanced, you can search for surrounding access points, and set the SSID to be connected from
those access points. Depending on the access point settings, they may not be displayed in the list. You must set security separately.
p.76
s
You can select the channels used to connect in Quick mode. If interference from other signals occurs, use a different channel.
To prevent the SSID from being displayed on the LAN Standby screen, set this to Off.
You can set whether or not (On/Off) to use DHCP
If this is set to On you cannot set any more addresses.
You can input the IP address g assigned to the projector.
You can input a number from 0 to 255 in each field of the address. However, the following IP addresses cannot be used. 0.0.0.0,
127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
You can input the Subnet Mask g for the projector. You can input a number from 0 to 255 in each field of the address. However, the
following subnet masks cannot be used.
0.0.0.0, 255.255.255.255
You can input the IP address for the gateway for the projector.
You can input a number from 0 to 255 in each field of the address. However, the following Gateway addresses
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
To prevent the IP address from being displayed on the LAN Standby screen, set this to Off.
This is a specific string of the wireless LAN module.
Function
g .
75
g cannot be used.