Saving a User's Logo
Saving a User's Logo
You can save the image that is currently being projected as a User's Logo.
The saved user's logo can be used as the display image when there is no
video signal input or during starting up.
q
Once a User's Logo has been saved, the logo cannot be returned to the
factory default.
Procedure
A
Project the image you want to use as the User's Logo, and
then press the [Menu] button.
Using the Remote Control
B
Select Extended - "User's Logo" from the configuration
menu. s "Using the Configuration Menu"
Using the Control Panel
p.55
• If User's Logo Protect from Password Protect is set to On, a message is
q
displayed and the user's logo cannot be changed. You can make changes
after setting User's Logo Protect to Off. s
• If User's Logo is selected when keystone, E-Zoom, or Aspect are being
performed, the function currently being performed is cancelled.
C
When "Choose this image as the User's Logo?" is displayed,
select "Yes".
q
When you press the [Enter] button on the remote control or the control
panel, the screen size may change according to the signal as it changes to
the resolution of the image signal.
43
p.45