Using The Tools Window - Epson PowerLite Pro Z8150NL User Manual

About Crestron RoomView®

Using the tools window

The following window will be displayed if the Tools tab is clicked in the
operation window. This window is used to change the settings in the
projector that is currently connected.
A
Crestron Control
Makes settings for Crestron® central controllers.
B
Projector
The following items can be set.
Item
Projector Name Enter a name to differentiate the projector that is
currently connected from other projectors on
the network. (The name can contain up to 15
single-byte alphanumeric characters.)
Function
Item
Location Enter an installation location name for the
projector that is currently connected on the
network. (The name can contain up to 32
single-byte alphanumeric characters and
symbols.)
Assigned To Enter a user name for the projector. (The name
can contain up to 32 single-byte alphanumeric
characters and symbols.)
DHCP Select the Enabled check box to use DHCP. You
cannot set static IP addresses if DHCP is enabled.
IP Address Enter the IP address to assign to the currently
connected projector.
Subnet Mask Enter a subnet mask for the projector that is
currently connected on the network.
Default Gateway Enter the gateway address for the currently
connected projector.
Send Click this button to commit changes made to the
Projector.
141
Function