How To Use The Power Key; When Using This Machine In Factory Default Status; When Using The Power Key As A Power Save Key - Konica Minolta bizhub C654 User Manual

5.1

How to Use the Power Key

5 Managing the Power Supply of this Machine
5.1 How to Use the Power Key

When using this machine in factory default status

For details on how to use the Power key in factory default status, refer to [User's Guide Preface (Trademark
Licenses)].

When using the Power key as a power save key

The Power key can be used as a power save key to manually switch to Power Save mode. Power Save mode
is classified into two modes: Low Power mode and Sleep mode.
- To use the Power key as a power save key, change the Power key setting (default: [Sub Power OFF]).
For details, refer to page 5-4([Power Key Settings]).
- Press the Power key to select whether to switch to Low Power or Sleep mode (default: [Low Power]).
For details, refer to page 5-4([Power Save Settings]).
When the Power key is pressed, the status of this machine changes as shown below. The way status chang-
es varies depending on how the Power key is pressed.
Power key
Short press
bizhub C754/C654
Short press
Hold down
Status of this ma- Status of
chine LED
Low Power mode Flash:
(Default value) Blue
Sleep mode Flash:
Blue
Sleep Mode
Sub Power OFF
Description
Turns off the display of the Touch Panel to re-
duce power use.
This machine returns to the normal mode when
it receives data or faxes or when the user oper-
ates the Touch Panel.
Provides power-saving effect higher than Low
Power mode. A time required to return to the
normal mode is longer than Low Power mode.
This machine returns to the normal mode when
it receives data or faxes or when the user oper-
ates the Touch Panel.
5
Power Saving
Effect: Low
Power Saving
Effect: High
5-2