Configuring The Power Key And Power Save Operations (For The Administrator) - Konica Minolta bizhub C654 User Manual

5.2

Configuring the Power key and power save operations (for the administrator)

5.2 Configuring the Power key and power save operations (for the ad-
ministrator)
Configure the settings on how to use the Power key and the machine action in Power Save mode.
Press [Utility] - [Administrator Settings] - [System Settings] - [Power supply/power save settings], and con-
figure the following settings.
Settings
[Low Power Mode Set-
tings]
[Sleep Mode Settings]
[Power Key Setting]
[Power Save Settings]
[Enter Power Save Mode]
[Power Consumption in
Sleep Mode]
[Power Saving Fax/Scan]
bizhub C754/C654
Description
Change the time required to automatically change to Low Power mode af-
ter you have not operated this machine for a fixed period of time.
In Low Power mode, the display of the Touch Panel is turned off to reduce
power consumption.
[15] minute is specified by default (allowable range: [10] to [240] min.).
Change the time required before the machine automatically enter Sleep
mode if you have not operated this machine.
Sleep mode provides a greater power saving effect than Low Power mode.
However, the time required to return to the normal mode is longer than the
time required to recover from Low Power mode.
[30] minute is specified by default (allowable range: [15] to [240] min.).
Select whether to use the Power key on the Control Panel as a sub power
OFF key or as a power save key.
• [Sub Power OFF]: Press the Power key to turn the sub power off. If the
Power key is held down, Power Save mode shifts to ErP Auto Power
Off mode (close to Main Power Off mode), which offers a higher power
saving effect than Sub Power Off mode.
• [Power Save]: Press the Power key to shift to Power Save mode (Low
Power or Sleep mode). Hold down the Power key to shift to sub power
off mode.
[Sub Power OFF] is specified by default.
If [Power Save] is selected for [Power Key Setting], select the type of Power
Save mode you want to switch when pressing the Power key on the Con-
trol Panel.
• [Low Power]: Switches to Low Power mode. Turns off the display of the
Touch Panel to reduce power consumption.
• [Sleep]: Switches to the Sleep mode. Sleep mode provides a greater
power saving effect than Low Power mode. However, the time required
to return to the normal mode is longer than the time required to recover
from Low Power mode.
[Low Power] is specified by default.
Select the timing for the machine to return to the Power Save mode after
printing a job it has received in the Power Save mode from a fax machine
or computer.
• [Normal]: Switches to Power Save mode based on the time specified in
[Low Power Mode Settings] or [Sleep Mode Settings].
• [Immediately]: Switches to Power Save mode immediately after a print
job has ended.
[Immediately] is specified by default.
Select whether to reduce power consumption in the Sleep mode.
• [Enabled]: Further reduces power consumption in Sleep mode. Usually,
select [Enabled].
• [Disabled]: Select this option when a smooth network communication
is not established while [Enabled] is enabled.
[Enabled] is specified by default.
Select whether to give priority to the power saving when the machine re-
turns from Sleep or sub power off mode to a mode other than copy mode.
When returning to a mode that does not involve printing, such as scan/fax
mode, power consumption can be reduced by not adjusting the tempera-
ture of the Fusing Unit on this machine.
You can set this option when you have selected an option other than
[Copy] in [Priority Mode] that is selected by [Administrator Settings] - [Sys-
tem Settings] - [Reset Settings] - [System Auto Reset].
• [Power Save]: The temperature of Fusing Unit is not adjusted when the
machine returns to the normal mode.
• [Standard]: The temperature of Fusing Unit is adjusted when the ma-
chine returns to the normal mode.
[Standard] is specified by default.
5
5-4