Operating The Power Key - Konica Minolta bizhub C754 Quick Start Manual

2
2.3.2

Operating the Power key

When not operating this machine for a long period of time, for example, after working, press the Power key
to shift to the power save mode.
The machine mode changes to the following different modes depending on how the Power key is pressed.
Pressing the Power key during operation changes to the Sub Power OFF mode. Holding down the Power
key changes to the ErP Auto Power OFF mode.
In either case, press the Power key again to turn the power on.
Status of this machine
Power OFF
Power ON
2-18
Description
Sub Power While the sub power is turned off, this machine can receive data or
OFF faxes, however, it cannot scan or print an original. If data or faxes are
received while the sub power is turned off, they are printed when the
sub power is turned on.
The key lamp lights up orange.
ErP Auto This machine is placed in the standby mode with a lower power con-
Power OFF sumption than the Sub Power OFF mode.
In ErP Auto Power Off mode, this machine cannot receive data or fax-
es, and it also cannot scan or print an original.
The key lamp flashes orange.
The key lamp lights up blue.
The power is returned immediately by pressing any key on the Touch
Panel or Control Panel even when the Control Panel is off.
Power supply 2.3
bizhub C754/C654