6.3
Operations required to use this function (for the administrator)
% After scanning the finger vein patterns, place the same finger, then tap [Authentication Test]. If the
authentication test has succeeded, tap [New]. If the authentication test has failed, retry scanning.
NOTICE
Do not place anything other than your finger on the scanning section during scanning operation. Oth-
erwise, it may result in a malfunction.
Do not disconnect the USB cable from the authentication unit during scanning. Doing so may cause the
system to become unstable.
6
Tap [Close] to finish the user information registration.
bizhub C754/C654
6
6-8