Konica Minolta bizhub C654 User Manual page 12

2.1 Checking the list of optional components
No. Name
4
Working Table WT-509
5
Working Table WT-506
6 Output Tray OT-503
7
Keyboard Holder KH-102
8 Mount Kit MK-715
9 Large Capacity Unit LU-301
10 Large Capacity Unit LU-204
11
Image Controller IC-414 ver1.0
12
Finisher FS-534
13
Saddle Stitcher SD-511
14 Punch Kit PK-520
15
Saddle Stitcher SD-512
16
Finisher FS-535
17 Punch Kit PK-521
18 Post Inserter PI-505
19 Job Separator JS-602
20
Z Folding Unit ZU-606
The following options are not shown in the figure.
21 Fax Kit FK-511
22
Stamp Unit SP-501
23 Spare TX Marker Stamp 2
bizhub C754/C654
Description
This is used to move the Control Panel. This is also
used when the Authentication Unit is installed.
Provides an area to temporarily place an original or
other materials. This is also used when the Authenti-
cation Unit is installed.
Collects printed pages.
Install this holder to use a external keyboard.
For details on external keyboards, contact your service
representative.
Used to print data on banner paper.
Allows you to load up to 3000 sheets of 8-1/2 e 11 (A4)
size.
This unit is referred to as a Large Capacity Unit in the
manual.
Allows you to load up to 2500 sheets of SRA3 or 11 e
17 (A3) size.
To change the paper size, contact your service repre-
sentative.
This unit is referred to as a Large Capacity Unit in the
manual.
Built-in Image Controller.
Installing this unit will provide higher quality printing re-
sult.
Video Interface Kit VI-506 is required to install Image
Controller IC-414 ver1.0.
Sorts, groups and staples printed paper before output-
ting it.
Install this unit onto Finisher FS-534. This unit sup-
ports the fold/bind function.
It is referred to as Saddle Stitcher in the manual.
Install this unit onto Finisher FS-534.
This unit supports the punching function.
Install this unit onto Finisher FS-535. This unit sup-
ports the fold/bind function.
It is referred to as Saddle Stitcher in the manual.
Sorts, groups and staples printed paper before output-
ting it.
Install this unit onto Finisher FS-535.
This unit supports the punching function.
Install this unit onto the Finisher FS-535 to enable in-
sertion of a cover sheet into copied or printed sheets.
This unit also allows you to manually operate the fin-
isher (only the lower tray is available).
Install this unit onto Finisher FS-535.
Collects printed pages.
This unit is referred to as Job Separator in the manual.
Install this unit onto the Finisher FS-535 to enable Z
folding or punching holes.
This unit is referred to as a Z Folding Unit in the man-
ual.
Used to operate this machine as a fax machine. Alter-
natively, this kit allows more telephone lines to be con-
nected.
Stamps a scanned original when sending a fax. This
unit allows you to check that the original has been
scanned.
A replacement stamp for the Stamp Unit SP-501.
2
2-3