Accessing The User Box And User Box File - Konica Minolta bizhub C452 Security Manual

3.4 User Box Function
3.4.3

Accessing the User Box and User Box file

<From the Control Panel>
0 For the logon procedure, see page 3-2.
0 Do not leave the machine while you are in the user operation mode. If it is absolutely necessary to leave
the machine, be sure first to log off from the user operation mode.
1
Log on to the user operation mode through User Authentication from the control panel.
2
Press the [BOX] key.
3
Select the desired User Box and touch [Use/File].
% [Use/File] allows you to print or send the saved document. It also allows you to copy, delete, or file
the document.
% To save a new document, select [Save Document].
4
Enter the 8-digit User Box Password from the keyboard or keypad.
% Press the [C] key to clear all characters.
% Touch [Delete] to delete the last character entered.
% Touch [Shift] to show the upper case/symbol screen.
% Touch [Cancel] to go back to the screen shown in step 3.
5
Touch [OK].
% If there is a mismatch in the User Box Passwords, a message appears that tells that authentication
has not been successful. The machine then prohibits entry of the User Box Password for 5 sec. En-
ter the correct User Box Password.
% If the Enhanced Security Mode is set to [ON], entry of a wrong User Box Password is counted as
unauthorized access. If a wrong User Box Password is entered a predetermined number of times
(once to three times) or more set by the Administrator of the machine, a message appears that tells
that authentication has not been successful for any subsequent operation for authentication. The
machine is then set into an access lock state, rejecting any more logon attempts. To cancel the ac-
cess lock state, the Administrator of the machine must perform the Release Setting. Contact the
Administrator of the machine.
bizhub C652/C652DS/C552/C552DS/C452
3
3-32