Parallel - Lexmark E238 Service Manual

4511-xxx
Development (continued)
Menu item
Continuous
print—
simplex
Tray 2
Print History
Defaults
Configuration
ID

Parallel

Menu item
Par S Strobe
Adjustment
3-12
Service Manual
Use setting to
Continuously print pages
containing cross lines,
printer information, and
margin settings.
This menu item does not
appear if Tray 2 is not
installed.
Press and hold
the lights flash to begin.
Press to stop.
Print history of errors.
Press and hold
the lights flash to print.
Change sizes and
designations to metric.
Allow the printer ID to
match the label ID after
the controller card is
replaced.
Use setting to
Adjust for an unusually
long parallel cable.
(Parallel mode 2 only is
supported and can be
turned off in the
configuration group.)
Value
until
until
U.S. (default)
Non-U.S.
000101 (default)
000189
Value
Range from -1 to 3,
0 is default.