Network - Lexmark E238 Service Manual

4511-xxx

Network

Use the network menu to change printer settings on jobs sent through a
network port (either standard network or network opt <x>).
Menu item
NPA Mode
MAC Binary
PS
Set Card
Speed
3-10
Service Manual
Use setting to
Send print jobs to the
printer and query printer
status information
simultaneously.
Configure the printer to
process Macintosh binary
PostScript print jobs.
Automatically detect the
connection speed of your
network.
This setting can be
disabled to set the speed
manually.
Values
Off
Auto (default)
Off—The printer filters
PostScript print jobs using
Standard protocol.
On—The printer processes raw
binary PostScript print jobs from
computers using the Macintosh
operating system. This setting
often causes Windows print jobs
to fail.
Auto (default)—The printer
processes print jobs from
computers using either
Windows or Macintosh
operating systems.
Auto (default)—the printer
detects current network speed.
10Mbps, half duplex—forces the
printer to try to connect to the
network only at 10Mbps, half
duplex.
10Mbps, full duplex—forces the
printer to try to connect to the
network only at 10Mbps, full
duplex.
100Mbps, half duplex—forces
the printer to try to connect to
the network only at 100Mbps,
half duplex.
100Mbps, full duple—forces the
printer to try to connect to the
network only at 100Mbps, full
duplex.