Step 4 : Connecting To The Computer With A Parallel Cable - Lexmark E210 Setup Manual

Connecting to the Computer
with a Parallel Cable
1
Make sure both the printer and the computer are turned off and unplugged.
2
Plug the parallel printer cable into
the connector as shown.
Push the metal clips down to fit
inside the notches on the cable
plug.
3
Connect the other end of the cable
to the parallel interface port on
your computer, and tighten the
screws.
Refer to your computer
documentation if you need help.
If you are using a USB interface
Go to "Using Your Printer with a USB Cable" on
page A.11.
All manuals and user guides at all-guides.com
To the parallel
port on PC
S U
ETTING
Y P 2.7
P OUR RINTER