Input Trays; Output Trays - Xerox 7760DN - Phaser Color Laser Printer Administrator's Manual

Input Trays

The following table lists the PCL commands for the input trays supported by the
Phaser 7760 printer. The table also lists the alternate tray used if the optional input tray is not
installed.
Note:
When more than one command is listed, you can use either command.
Input Trays
Tray 1 (MPT) in multi-sheet mode
Tray 1 (MPT) in manual feed mode
Tray 2
Tray 3
Tray 4
Tray 5
Autoselect
Current tray/page eject
* The character that follows the "&" in the command is the lowercase letter "L".

Output Trays

The following table lists the PCL commands and PJL values for the output trays supported by
the Phaser 7760 printer.
Output Tray
Top output tray
Finisher output tray
* The character that follows the "&" in the command is the lowercase letter "L".
** The PJL Value is used with the PJL "OUTBIN" variable.
PCL 5 Command
<Esc>&l4H
<Esc>&6H
<Esc>&l2H
<Esc>&l3H
<Esc>&l1H
<Esc>&l5H
<Esc>&l8H
<Esc>&l20H
<Esc>&l21H
<Esc>&l7H
<Esc>&l10H
PCL 5 Command
<Esc>&l1G
<Esc>&l4G
System Administrator Guide
B-4
Phaser PCL Commands
*
Alternate Tray
n/a
n/a
n/a
Tray 2
Tray 1
Tray 1
n/a
n/a
*
PJL Value
FACEDOWN, UPPER,
STANDARD, or OFFSET
OPTIONALOUTPUTBIN1