Xerox 7760DN - Phaser Color Laser Printer Administrator's Manual page 48

9. Do one of the following:
To create the Administrative User account and to enable SNMP v3, enter a user name
■
or accept the default name admin, and then click the Create button.
■ To configure the Key User and other account settings, click the Next button.
■ To delete the Administrative User account and disable SNMP v3, click the Delete
button. This also deletes all other accounts, including the Key User and Any User
settings.
The Administrative User Account Settings
■ User Name: The Administrative User account name defined on the Configure SNMP v3:
Administrative User Account page.
■ Authentication Protocol:The protocol associated with the Authentication Key; selected
on the Configure SNMP v3: Administrative User Account page.
■ Authentication Key: The Authentication Key defined on the Configure SNMP v3:
Administrative User Account page is displayed as a row of asterisks (*) here.
■ Privacy Protocol: The protocol associated with the Privacy Key; selected on the
Configure SNMP v3 Administrative User Account page.
■ Privacy Key: The Privacy Key defined on the Configure SNMP v3: Administrative
User Account page is displayed as a row of asterisks (*) here.
■ MIB Access: The Administrative User account's MIB access permissions, which are set to
Read/Write by default.
The Key User Account Settings
User Name: The Key User account name defined on the Configure SNMP v3: Key User
■
Account page.
■ Authentication Protocol: The protocol associated with the Authentication Key; selected
on the Configure SNMP v3 Key User Account page.
■ Authentication Key: The Authentication Key defined on the Configure SNMP v3: Key
User Account page is displayed as a row of asterisks (*) here.
■ Privacy Protocol: The protocol associated with the Privacy Key; selected on the
Configure SNMP v3: Key User Account page.
Privacy Key: The privacy key defined on the Configure SNMP v3: Administrative User
■
Account page is displayed as a row of asterisks (*) here.
■ MIB Access The Key User account's MIB access permissions selected on the Configure
✚
SNMP v3: Key User Account page. MIB access for the Key User account can be set to
Read or Read/Write.
Note: SNMP Read and SNMP Write access for the Any User account must be equal to or less
than the read and write access privileges set for the Key User account. Once the Key User
account is created, if the Any User account is set to have read and/or write access, but the Key
User account access is not set, the Key User account is set with the same access privileges as
the Any User account by default. Similarly, if the Key User account does not have SNMP
Write access, the Any User account cannot be set with write access.
System Administrator Guide
4-18
Configuring SNMP