Inserting The Battery; To Insert The Battery - Dymo LabelManager 420P Quick Start Manual

Become familiar with the features shown in Figure 2.
1 Battery compartment
2 Cutter button
Label exit slot
3

Inserting the Battery

To insert the battery

Slide the battery compartment cover
1
away from the label maker. See Figure 3.
Insert the battery into the battery
2
compartment.
Replace the battery compartment cover.
3
To charge the battery
Plug the charging adapter into the power
1
connector on the top of the label maker.
Plug the other end of the charging adapter into a power outlet.
2
The charging adapter is only used for recharging the battery; the
NOTE
charging adapter cannot be used to power the label maker.
2
1
2
3
5 4
Figure 2
4 Power connector
5 USB connector
Label compartment
6
6
7 Cleaning tool
Figure 3
7