Using Your Label Maker With Your Computer; Connecting The Label Maker To Your Computer - Dymo LabelManager 420P Quick Start Manual

To print a label
Enter text to create a simple label.
1
Press Print.
2
Press the cutter button to cut the label.
3
Remove the paper backing from the label to expose
4
the adhesive, and then attach the label.

Using Your Label Maker with Your Computer

Connecting the Label Maker to your Computer

The label maker connects to your computer using the USB connection located on
the top of the label maker. You do not need to install additional software or drivers
to use the label maker with your computer.
To connect the label maker to your computer
Plug the USB cable into the USB port on the top of
1
the label maker. See Figure 8.
Plug the other end of the USB cable into an
2
available USB port on your computer.
4
Split
backing
Figure 7
Figure 8