Inserting The Battery - Dymo MobileLabeler Quick Start Manual

The label maker uses a rechargeable lithium-ion polymer (LiPo)
battery and is shipped partially charged.
!
Make sure to read the LiPo Safety Precautions on page 6.
To insert the battery
1
Insert the battery into the battery
compartment as shown.
2
Close the cover.
3
Press to turn on the power.
Fully charge the battery as soon as
possible. The battery will take
approximately 2.5 hours to fully charge.
To charge the battery
1
Plug the power cord into the power
adapter.
2
Plug the power adapter into the
power connector and plug the
power cord into a power outlet.

Inserting the Battery

3
EN
Power connector