Table of Contents
Advertisement
OPTION Menu (continued)
Item
SERVICE
(continued)
(continued on next page)
AUTO ADJUST
Using the ▲/▼ buttons enables/disables the
automatic adjustment. When DISABLE is selected,
the automatic adjustment feature is disabled,
although rough adjustment is automatically
performed depending on the basic setting.
FINE ó FAST ó DISABLE
FINE: Finer tuning including H.SIZE adjustment.
FAST: Faster tuning, setting H.SIZE to prearranged data for the
input signal
• Depending on conditions, such as input image, signal cable to
the projector, environment around the projector, etc., the automatic
adjustment may not work correctly. In such a case, please
choose DISABLE to disable the automatic adjustment, and make
adjustment manually.
GHOST
1. Select a color element of ghost using the ◄/►
buttons.
2. Adjust the selected element using the ▲/▼
buttons to disappear ghost.
FILTER MESSAGE
Use the ▲/▼ button to set the timer for the interval
to show the message for cleaning up the air filter.
50h ó 100h ó 200h ó 300h ó 400h ó 500h
TURN OFF ó 800h ó 700h ó 600h
After choosing an item except TURN OFF, the
message "REMINDER *** HRS PASSED AFTER
THE LAST FILTER CHECK" will appear after the
timer reaches the interval time set by this feature
(56).
When the TURN OFF is chosen, the message will not appear.
Utilize this feature to keep the air filter clean, setting the suitable
time according to your environment of this projector.
• Please check and clean the air filter periodically, even if there is no
message. If the air filter becomes to be blocked by dust or others,
the internal temperature will rise, which could cause malfunction, or
reduce the lifetime of the projector.
• Please be careful with the operating environment of the projector
and the condition of the air filter.
Description
OPTION Menu
4
Advertisement
Table of Contents
