Table of Contents
Advertisement
SCREEN Menu (continued)
Item
START UP
MyScreen
(continued on next page)
Using the ▲/▼ buttons switches the mode for the start-up screen.
The start-up screen is a screen displayed when no signal or an
unsuitable signal is detected.
MyScreen ó ORIGINAL ó TURN OFF
MyScreen
ORIGINAL
TURN OFF
• To avoid remaining as an afterimage, the MyScreen or ORIGINAL
screen will change to the BLANK screen (34) after several
minutes. If also the BLANK screen is the MyScreen or ORIGINAL,
the plain black screen is instead used.
• When the TURN ON is selected to the MyScreen PASSWORD of
SECURITY item in OPTION menu (44), the START UP is fixed to
MyScreen.
This item allows you to capture an image for use as a MyScreen
image which can be used as the BLANK screen and START UP
screen. Display the image you want to capture before executing the
following procedure.
1. Selecting this item displays a dialog
titled "MyScreen". It will ask you if
you start capturing an image from the
current screen.
Please wait for the target image to be displayed, and press the
ENTER button when the image is displayed. The image will
freeze and the frame for capturing will appear.
To stop performing, press the RESET or ESC button.
2. Using the ▲/▼/◄/► buttons adjusts
the frame position.
Please move the frame to the position
of the image which you want to use.
The frame may not be able to be
moved for some input signals.
To start registration, press the ENTER
button.
To restore the screen and return to the
previous dialog, press the RESET or
ESC button.
Registration takes several minutes.
(continued)
Description
Feature
Screen can be registered by the MyScreen item
(35)
.
Screen preset as the standard screen.
Plain black screen.
SCREEN Menu
35
Advertisement
Table of Contents
