Power On/Off; Turning On The Power; Turning Off The Power - Dukane 8783 Operating Manual

Hide thumbs Also See for 8783:
Table of Contents

Advertisement

Power on/off

Turning on the power

1.
Make sure that the POWER indicator turns in
steady orange and the lens cover is removed.
2.
Press the STANDBY/ON button on the projector or
the remote control.
The projection lamp will light up and the POWER
indicator will begin blinking in green. When the power
is completely on, the indicator will stop blinking and
light in steady green.
To display the picture, select an input signal according to the
section "Selecting an input signal" (15).

Turning off the power

1.
Press the STANDBY/ON button on the projector or the remote control. The message
"Power off?" will appear on the screen for about 5 seconds.
2.
Press the STANDBY/ON button again while the message appears.
The projector lamp will go off, and the POWER indicator will begin blinking in orange.
Then the POWER indicator will stop blinking and light in steady orange when the lamp
cooling is complete.
3.
Attach the lens cover, after the POWER indicator turns in steady orange.
Do not turn the projector on for about 10 minutes after turning it off. Turning the
projector on again too soon could shorten the lifetime of some consumable parts of the
projector.
WARNING ►A strong light is emitted when the projector's power is on. Do
not look into the lens of the projector or look inside of the projector through any
of the projector's openings.
►Do not touch around the lamp cover and the exhaust vents during use or just
after use, since it is too hot.
►Remove the power cord for complete separation.
NOTE • Please power on the projector prior to the connected devices. Power
off the projector, after all of connected devices are powered off.
• This projector has the function that can make the projector automatically turn
on/off. Please refer to the AUTO ON (38) and AUTO OFF (39) items of the
OPTION menu.
• Use the shutdown switch (58) only when the projector is not turned off by
normal procedure.
Power on/off
STANDBY/ON button
POWER indicator
LAMP
INPUT/
COMPUTER/
STANDBY/ON
ENTER
STORAGE
MENU
SEARCH
VIDEO
TEMP
POWER
ASPECT
AUTO
MAGNIFY
HOME
PAGE UP
ON
PAGE DOWN
END
OFF
Lens cover
FREEZE
MY BUTTON
1
POSITION
ENTER
ESC
BLANK
MY SOURCE/
VIDEO
COMPUTER
DOC.CAMERA
ASPECT
AUTO
SEARCH
BLANK
MAGNIFY
FREEZE
PAGE
VOLUME
VOLUME
UP
ON
DOWN
OFF
KEYSTONE
MY BUTTON
MUTE
1
2
MUTE
POSITION
MENU
ENTER
ESC
RESET
KEYSTONE
2
MENU
RESET
3

Advertisement

Table of Contents
loading

Table of Contents