Dukane ImagePro 8783 User Manual

Dukane imagepro 8783: user guide
Hide thumbs Also See for ImagePro 8783:

Advertisement

Quick Links

DUKANE Projector
8783
User's Manual (concise)
Thank you for purchasing this projector.
WARNING ►Before using this product, be sure to read all manuals for this
product. See "Using the CD manual" (2) to read the manuals in the CD. After
reading them, store them in a safe place for future reference.
Content

Contents of package........................... 

Preparations ....................................... 2
Using the CD manual ......................... 2
Arrangement ....................................... 3
Connecting your devices .................... 4
Connecting power supply ................... 5
into the remote control ...................... 5
Turning on the power .......................... 6
Contents of package
Your projector should come with the items
shown below. Check to make sure that all the
items are included. Contact to your dealer
immediately if any items are missing.
(1) Remote control with two AA batteries
(2) Power cord
(3) RGB cable
(4) Lens cover and Strap
(5) Filter cover for bottom-up use
(6) Security Label
(7) User's manuals (Book x1, CD x1)
(8) Soft case
NOTE • Keep the original packing materials for future reshipment. Be sure
to use the original packing materials when moving the projector. Use special
caution for the lens.
Displaying the picture ......................... 7
Turning off the power .......................... 7
Lamp................................................... 8
Air filter ............................................. 0
Regulatory notice.............................. 
Warranty and after-service ............... 2
Specification ..................................... 2
()
MY SOURCE/
VIDEO
COMPUTER
DOC.CAMERA
ASPECT
AUTO
SEARCH
BLANK
MAGNIFY
FREEZE
PAGE
VOLUME
UP
ON
DOWN
OFF
KEYSTONE
MY BUTTON
MUTE
1
2
POSITION
MENU
ENTER
ESC
RESET
(4)
(5)
(7)
(2)
(3)
(6)
(8)


Advertisement

Table of Contents
loading

Summary of Contents for Dukane ImagePro 8783

  • Page 1: Table Of Contents

    (7) User’s manuals (Book x1, CD x1) (8) Soft case NOTE • Keep the original packing materials for future reshipment. Be sure to use the original packing materials when moving the projector. Use special caution for the lens. Adjusting the projector’s elevator ... 6 Displaying the picture ...
  • Page 2: Preparations

    (2) When “main.html” file is clicked, Web browser will start and Initial window will appear. 2. Click the model name of your projector first, and then click language you want from the displayed list. The user’s manual (detailed) will open.
  • Page 3: Arrangement

    .6 WARNING ► Install the projector in a stable horizontal position. ►Place the projector in a cool place, and ensure that there is sufficient ventilation. ►Do not place the projector anyplace where it may get wet. CAUTION ►Avoid placing the projector in smoky, humid or dusty place.
  • Page 4: Connecting Your Devices

    Connecting your devices Be sure to read the manuals for devices before connecting them to the projector. Make sure that all the devices are suitable to be connected with this product, and prepare the cables required to connect. Please refer to the following illustrations to connect them.
  • Page 5: Connecting Power Supply

    WARNING ►Please use extra caution when connecting the power cord, as incorrect or faulty connections may result in fire and/or electrical shock. • Only use the power cord that came with the projector. If it is damaged, contact your dealer to newly get correct one.
  • Page 6: Turning On The Power

    For more information, please see the “Operating Guide” in the CD. Adjusting the projector's elevator When the place to put the projector is slightly uneven to the left or right, use the elevator feet to place the projector horizontally.
  • Page 7: Displaying The Picture

    Press the STANDBY/ON button again while the message appears. The projector lamp will go off, and the POWER indicator will begin blinking in orange. Then the POWER indicator will stop blinking and light in steady orange when the lamp cooling is complete.
  • Page 8: Lamp

    (5) Press the ▲ button to select “RESET” on the dialog. It performs resetting the lamp time. CAUTION ►Do not touch any inner space of the projector, while the lamp is taken out. NOTE • Please reset the lamp time only when you have replaced the lamp, for a suitable indication about the lamp.
  • Page 9: Lamp Warning

    Note that shards of glass could damage the projector’s internals, or cause injury during handling, so please do not try to clean the projector or replace the lamp yourself. • If the lamp should break (it will make a loud bang when it does),...
  • Page 10: Air Filter

    ►Use only the air filter of the specified type. Do not use the projector without the air filter or the filter cover. It could result in a fire or malfunction to the projector. ►Clean the air filter periodically. If the air filter becomes clogged by dust or the like, internal temperatures rise and could cause a fire, a burn or malfunction to the projector.
  • Page 11 Some cables have to be used with the core set. Use the accessory cable or a designated- type cable for the connection. For cables that have a core only at one end, connect the core to the projector. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
  • Page 12: Warranty And After-Service

    If an abnormal operation (such as smoke, strange odor or excessive sound) should occur, stop using the projector immediately. Otherwise if a problem occurs with the projector, first refer to the “Troubleshooting” of the “Operating Guide” in the CD and run through the suggested checks.

Table of Contents