Table of Contents
Advertisement
SETUP Menu
SETUP Menu (continued)
Item
WHISPER
MIRROR
STANDBY MODE
3
Using the ▲/▼ buttons turns off/on the whisper mode.
NORMAL ó WHISPER
• When the WHISPER is selected, acoustic noise and screen
brightness are reduced.
Using the ▲/▼ buttons switches the mode for mirror status.
NORMAL ó H:INVERT ó V:INVERT ó H&V:INVERT
If the Transition Detector is TURN ON and MIRROR status is
changed, Transition Detector Alarm (47) will be displayed when
projector is restarted after the power switch is turned off.
Using ▲/▼ buttons switches the standby mode setting between
NORMAL and SAVING.
NORMAL ó SAVING
When SAVING is selected, the power consumption in the standby
mode is lowered with some functional restriction as below:
• When SAVING is selected, any setting of the AUDIO (33) in
the standby mode is invalid, and no signal is output in the standby
mode.
Description
Advertisement
Table of Contents
