Freezing The Screen; Temporarily Blanking The Screen - Dukane 8783 Operating Manual

Freezing the screen

1.
Press the FREEZE button on the remote control.
The "FREEZE" indication will appear on the screen (although
the indication will not appear when the TURN OFF is selected
to the MESSAGE item of the SCREEN menu (36)), and the
projector will go into the FREEZE mode.
To exit the FREEZE mode and restore the screen to normal,
press the FREEZE button again.
● The projector automatically exits from the FREEZE mode when
some control buttons are pressed.
● If the projector continues projecting a still image for a long time, the LCD panel
might possibly be burned in. Do not leave the projector in the FREEZE mode
for too long.

Temporarily blanking the screen

1.
Press the BLANK button on the remote control.
The blank screen will be displayed instead of the screen of
input signal. Please refer to the BLANK item in the SCREEN
menu (34).
To exit from the blank screen and return to the input signal
screen, press the BLANK button again.
● The projector automatically exits from the FREEZE mode when
some control buttons are pressed.
NOTE • The sound is not connected with the blank screen function. If
necessary, set the volume or mute first.
Operating
FREEZE button
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
AUTO
ASPECT SEARCH BLANK
MAGNIFY FREEZE PAGE VOLUME
UP
ON
DOWN
OFF
KEYSTONE MY BUTTON MUTE
1 2
POSITION MENU
ENTER
RESET
ESC
BLANK button
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
AUTO
ASPECT SEARCH BLANK
MAGNIFY FREEZE PAGE VOLUME
UP
ON
DOWN
OFF
KEYSTONE MY BUTTON MUTE
1 2
POSITION MENU
ENTER
ESC RESET
9