Table of Contents
Advertisement
COMSPHERE 3900 Series Modems
To save the new password to a configuration area, make the following selections:
Press the
Select Save.
Select a configuration area (Active (Saved), Customer 1, or Customer 2) to save the changes.
Select the
branch.
Summary
When using the DCP to edit configuration options, keep the following in mind:
5-8
RemAccssPasswrd:
"12345678
Nxt
F1
F2
key to scroll up (twice).
Choose Function
Edit
F1
F2
Sav EditArea to
Active(Saved)
F1
F2
key to exit to the Top-Level menu or select the
Nxt has two functions. First, it indicates that more configuration options are available within
that group. These are accessed by selecting Nxt (pressing F1) and scrolling down to the next
configuration option. Second, it indicates that what is displayed on the LCD is the current
setting. If you scroll left or right, Nxt disappears and reappears if a new value is selected.
End appears when you have scrolled down to the last configuration option available in that
group. Selecting End returns you to the top of the configuration group. You are free to enter
that group again or scroll left or right to the next configuration options group.
The
key takes you one step up in the Configure branch each time it is pressed.
The
key causes you to exit the Configure branch and return to the Top-Level menu. If
any changes are made to configuration options, the DCP allows you to save these changes to
either the Active (Saved), Customer 1, or Customer 2 configuration areas.
The
and
keys move selections across the LCD.
The function keys F1, F2, and F3 select the LCD choice that appears above that function
key.
September 1998
F3
Save
F3
>
F3
key to remain in the Configure
3910-A2-GN32-40
Advertisement
Table of Contents
