Digicom COMSPHERE 3910 Installation And Operation Manual page 135

Press the
Select the F2 ( " ) key to change the number above the cursor ( 9 ) to 0.
To save the edited threshold(s):
Press the
Select Save.
If the edited VF thresholds are valid, the Save command stores them into nonvolatile memory.
When the Save completes, the message Save Completed appears.
If the edited VF threshold is invalid (out of range), the error message Thd Out of Range
appears. This indicates the Save procedure was unsuccessful. Return to the Edit screen and
correct the invalid threshold range.
3910-A2-GN32-40
key to move the cursor to the next position ( 9 ).
RSL High (- dBm)
" 10
Nxt
F1 F2 F3
If you want to modify additional VF thresholds, select Nxt.
RSL High (- dBm)
" 10
Nxt
F1 F2 F3
key to scroll up to the Edit/Save screen.
VF Thresholds
Edit Save Reset
F1 F2 F3
Save VF Thresh
Thd Out of Range
F1 F2 F3
September 1998
NOTE
Control Branch
7-15