Lan Client List; Figure 53 Lan Client List; Table 29 Lan Client List - ZyXEL Communications P-660HW-DX User Manual

Table 28 DHCP Setup
LABEL
DNS Servers
Assigned by DHCP
Server
Primary DNS Server
Secondary DNS
Server
Apply
Cancel

6.6 LAN Client List

This table allows you to assign IP addresses on the LAN to specific individual computers
based on their MAC Addresses.
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address
is assigned at the factory and consists of six pairs of hexadecimal characters, for example,
00:A0:C5:00:00:02.
To change your ZyXEL Device's static DHCP settings, click Network > LAN > Client List.
The screen appears as shown.

Figure 53 LAN Client List

The following table describes the labels in this screen.

Table 29 LAN Client List

LABEL
IP Address
MAC Address
Add
P-660HW-Dx User's Guide
DESCRIPTION
The ZyXEL Device passes a DNS (Domain Name System) server IP address to
the DHCP clients.
This field is not available when you set DHCP to Relay.
Enter the IP addresses of the DNS servers. The DNS servers are passed to the
DHCP clients along with the IP address and the subnet mask.
If the fields are left as 0.0.0.0, the ZyXEL Device acts as a DNS proxy and
forwards the DHCP client's DNS query to the real DNS server learned through
IPCP and relays the response back to the computer.
Click Apply to save your changes to the ZyXEL Device.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
Enter the IP address that you want to assign to the computer on your LAN with
the MAC address specified below.
The IP address should be within the range of IP addresses you specified in the
DHCP Setup for the DHCP client.
Enter the MAC address of a computer on your LAN.
Click Add to add a static DHCP entry.
Chapter 6 LAN Setup
101