Sony RCP-D50 Operating Instructions Manual page 42

Menu Configuration and Basic Menu Operations
OTHERS menu (with the CCU-TX50)
Menu 2ndary menu Submenu
Adjusting White Shading
a)
Camera Screen Mode
Config
File Scene Trans
RCP Config RCP
Adjusting
RE Setting
VR Setting
Information
Cable Comp
SW Setting
CAM No.
a) The item "Screen Mode" is displayed when Screen Md Enable is set to ON with Security of RCP Config on the OTHERS menu.
b) Camera ID cannot be displayed when connected to the CCU-TX50.
42
Control item
• R
• G
• B
Screen Mode
CAM->MS
MS->CAM
Buzzer • Call
Volume • Touch
• Switch
• Master
Call Buzzer
Touch Click
SW Click
All Off
LED Bright • Switch
• Tally
• Other
• Master
BLACK/FLARE
VR STD Mode
VR Rel. Scale IRIS VR To select the response rate of the IRIS knob (relative-value
M. Black VR
Cable Length
• SW Assign/Sel
CAM ID->No.
• No.
Function
To adjust the V white shading (vertical variation of the white) of the
R signal
To adjust the V white shading of the G signal
To adjust the V white shading of the B signal
To select the Screen mode (4:3/16:9)
To transfer a scene file (from the camera to the Memory Stick)
To transfer a scene file (from the Memory Stick to the camera)
To set the volume of the call buzzer
To set the responding sound volume of the touch panel
To set the confirmation sound volume of the self-illuminating
switches
To set the total buzzer sound volume
To turn the call buzzer ON/OFF
To turn the responding sound of the touch panel ON/OFF
To turn the confirmation sound of switches ON/OFF
To turn the volume of all the buzzers ON/OFF
To set the brightness of respective LEDs
To set the brightness of the all LEDs of the unit
To select the function for the BLACK/FLARE knob
Black: Black balance adjustment
Flare: Flare balance adjustment
To select the initial settings for IRIS or MASTER BLACK
adjustment mode: Absolute or Relative
adjustment rates: 1/1, 1/2, and 1/4, where 1/1 is the quickest
response position)
(Only available for RCP-D50) To select the response rate of the
MASTER BLACK knob (relative-value adjustment rates: 1/1, 1/2,
and 1/4, where 1/1 is the quickest response position)
To display the software version of the unit
To set the length of the remote cable (5 m/25 m/50 m)
To allocate a function to the ASSIGN button
No Assign: No assignment
Black/Flare: Switching the function of the BLACK/FLARE knobs
Black Auto: ON/OFF of the auto black
ATW: ON/OFF of the auto tracing white balance
TLCS: ON/OFF of the total level control function
DynaLatitude: ON/OFF of the DynaLatitude function
CCU character: Switching the CCU-TX50 character pages
To switch the display of the camera number/tally indication of the
unit between camera ID and camera number
To select the camera number to be displayed on the RCP
(Not operative)
(Not operative)
b)