Sony RCP-D50 Operating Instructions Manual page 31

Menu Submenu Control item
a)
Lens/Pan Option 1
Option 2
• Focus
• Zoom
• Pan
• Tilt
a) The item "Lens/Pan" is displayed when Pan/Tilt Enable is set to ON with Security of RCP Config on the OTHERS menu.
b) To control the lens from this unit, the optional focus zoom servo unit and the interface unit for the camera adapter and lens are required.
c) To control the tripod head from this unit, an electric tripod head and the interface unit for the camera adapter and tripod head are required.
OTHERS menu (with the DXC-D30/D35 series)
Menu 2ndary menu Submenu
Adjusting White Shading
Camera Camera ID
Config
Center Marker
a)
Screen Mode
Diag
Bars
File Setup File
Copy to Slave
RCP Config RCP
Adjusting
a) The item "Screen Mode" is displayed when Screen Md Enable is set to ON with Security of RCP Config on the OTHERS menu.
Function
To turn the option control function 1 ON/OFF
To turn the option control function 2 ON/OFF
b)
To adjust the focus
b)
To adjust the zoom
c)
To adjust panning of the tripod head
c)
To adjust tilting of the tripod head
Control item
• R
• G
• B
CAM ID IND
Clock IND
• Char
• Cur
ID SET
Center Marker
Safety Zone
Screen Mode
Req
Reset
• Sel
Bars Type
Buzzer • Call
Volume
• Touch
• Switch
• Master
Call Buzzer
Touch Click
SW Click
All Off
Function
To adjust the V white shading (vertical variation of the white) of the
R signal
To adjust the V white shading of the G signal
To adjust the V white shading of the B signal
To turn the camera ID display ON/OFF while the camera is in Color
Bars mode
Switching of the clock indication
Cam: To always display the clock indication
Bars: To display only when the camera color bars are displayed
Off: No clock indication
To select characters when entering a camera ID (alphanumerics,
symbols, and space)
To move the cursor when entering a camera ID (eight characters)
To register the entered camera ID
To turn the center marker ON/OFF
To set the safety zone (90%/80%/OFF)
To select the Screen mode (4:3/16:9)
To request camera's self-diagnostic data (available only when any
abnormality has been detected during self-diagnosis)
To erase the camera's self-diagnostic data
To display the data read from the camera in order (No display when
no abnormality has been detected during self-diagnosis)
To select the type of color-bar signals:
SMPTE (SPLIT)/SNG/FF 75%/FF 100%
To store/retrieve a setup file
To copy the scene files to slave units
To set the volume of the call buzzer
To set the responding sound volume of the touch panel
To set the confirmation sound volume of the self-illuminating
switches
To set the total buzzer sound volume
To turn the call buzzer ON/OFF
To turn the responding sound of the touch panel ON/OFF
To turn the confirmation sound of switches ON/OFF
To turn the volume of all the buzzers ON/OFF
31