Sony RCP-D50 Operating Instructions Manual page 39

Page Menu Submenu
Paint 2 Detail Detail 1
Detail 2
Cross Color
Skin Detail
Black Gamma
Paint 3 Knee/DL
Gamma
Matrix Matrix 1
Matrix 2
Matrix 3
Skin Matrix
Control item Function
• Level To adjust the detail (contour correction) level
• H/V Ratio To adjust the ratio of V (Vertical) detail to H (Horizontal) detail in
detail correction. As the value becomes larger, the V detail ratio
increases.
• Frequency To adjust the boost frequency (thickness of contour lines) for the
detail correction
• Crispening To adjust the crispening level (appropriate level at which details of
noise signals are removed)
• Level Dep To adjust the level dependence (level at which the detail signal starts
being suppressed)
• CCS Level To adjust the cross color suppress level to suppress the phenomenon
of color jittering or coloring when a minutely striped pattern is shot
Detail Gate To turn ON/OFF the skin gate area (target color range of skin detail
correction or skin matrix adjustment)
Skin DTL To turn the skin detail function (which suppresses the contour
correction in the selected area) ON/OFF
Auto Skin The unit will go to Standby mode when this button is pressed, and
will automatically start obtaining the skin gate area data when Start
is pressed.
• Level To adjust the amount of skin detail correction. As the value becomes
larger, the amount of detail in the skin gate area decreases.
• Phase To adjust the color phase of the designated area
• Width To adjust the color width of the designated area
• Sat To adjust the color saturation of the designated area
• R To adjust the level of the black R gamma
• B To adjust the level of the black B gamma
• Master To adjust the master black gamma
Auto Knee To turn the auto knee ON/OFF
• Point To adjust the level at which the knee correction starts. As the value
becomes larger, the start level decreases, which enhances the knee
correction effects.
• Slope To adjust the knee slope (amount of knee correction)
• R To adjust the level of the R gamma
• B To adjust the level of the B gamma
• Master To adjust the master gamma
• Hue To adjust the hue of the linear matrix
• Sat To adjust the color saturation of the linear matrix
• Matrix To select the Matrix Adjustment mode
STD: Standard
FL: For shooting under fluorescent light
High Sat: High saturation (increasing the saturation of primary
colors)
• R-G/• G-B/• B-R To adjust the color tone for the R–G, G–B, or B–R elements of the
matrix
• Matrix To select the Matrix Adjustment mode
• R-B/• G-R/• B-G To adjust the color tone for the R–B, G–R, or B–G elements of the
matrix
• Matrix To select the Matrix Adjustment mode
Skin Matrix To select the skin matrix function ON/OFF
• Hue To adjust the hue of the designated area
• Sat To adjust the color saturation of the designated area
39