5.4.8 Miscellaneous Network Settings
NW_SETTING_ENABLE
Value Format
Description
Value Range
Default Value
CUSTOM_WEB_PAGE
Value Format
Description
Value Range
Default Value
5.4.9 LLDP-MED Settings
LLDP_ENABLE
Value Format
Description
Value Range
Default Value
Document Version
2012-06
Boolean
Specifies whether to enable the network settings from the unit.
Note
•
If you change this setting to "N" when the network settings (with
the exception of "HOST_NAME") in 5.4.1 IP Settings have been
made through Web user interface programming, clear these
settings once by performing Reset Web Settings from the Web
user interface, and then change this setting to "N".
•
Y (Enable network settings)
•
N (Disable network settings)
Y
Integer
Specifies whether to enable the settings in 4.3.1 Basic Network
Settings and 4.4.5 Time Adjust Settings from the Web user interface
when logged in with the User account.
0–3
–
0: Enable "Basic Network Settings" and "Time Adjust Settings"
–
1: Disable "Basic Network Settings"
–
2: Disable "Time Adjust Settings"
–
3: Disable "Basic Network Settings" and "Time Adjust Settings"
0
Integer
Selects whether to enable or disable sending and receiving LLDP
frames.
•
Y: Enable
•
N: Disable
Y
5.4.9 LLDP-MED Settings
Administrator Guide
201