5.4.1 IP Settings
HOST_NAME
Value Format
Description
Value Range
Default Value
Web User Interface Reference
DHCP_DNS_ENABLE
Value Format
Description
Value Range
Default Value
Phone User Interface
Reference
Web User Interface Reference
STATIC_IP_ADDRESS
Value Format
Description
190
Administrator Guide
String
Specifies the host name for the unit to send to the DHCP server.
Note
•
This setting is available only when "CONNECTION_TYPE" is set
to "1".
Max. 63 characters
Note
•
An empty string is not allowed.
•
If "{MODEL}" is included in this parameter, it will be replaced
with the unit's model name.
{MODEL}
Host Name (Page 78)
Boolean
Specifies whether to receive DNS server addresses automatically or to
assign a DNS server addresses (up to 2) manually.
Note
•
This setting is available only when "CONNECTION_TYPE" is set
to "1" and when "NW_SETTING_ENABLE" is set to "N".
•
Y (Use "USER_DNS1_ADDR" or, "USER_DNS1_ADDR" and
"USER_DNS2_ADDR")
•
N (Receive DNS server address automatically)
N
Configuring the Network Settings of the Unit (Page 19)
Domain Name Server (Page 79)
String
Specifies the IP address for the unit.
Note
•
This setting is available only when "CONNECTION_TYPE" is set
to "0" and when "NW_SETTING_ENABLE" is set to "N".
•
When you specify this parameter, you must specify
"STATIC_SUBNET" together in a configuration file.
Document Version
2012-06