Hold_Tone_Frq; Hold_Tone_Gain; Hold_Tone_Rpt; Hold_Tone_Timing - Panasonic KX-UT248-B Administration Manual

Value Range
Default Value

HOLD_TONE_FRQ

Value Format
Description
Value Range
Default Value

HOLD_TONE_GAIN

Value Format
Description
Value Range
Default Value

HOLD_TONE_RPT

Value Format
Description
Value Range
Default Value

HOLD_TONE_TIMING

Value Format
Description
Document Version 2012-06
0–16000 (0: Infinite time)
Note
•
Avoid setting 1–50 for any of the values.
120,120,120,120,120,14400
Comma-separated Integer
Specifies the dual-tone frequencies, in hertz, of the hold tone using 2
whole numbers separated by a comma.
0, 200–2000 (0: No tone)
425
Integer
Specifies the gain, in decibels, of the hold tone.
-24–6
0
Integer
Specifies whether the hold tone is repeated.
0–1
–
0: No Repeat
–
1: Repeat
1
Comma-separated Integer
Specifies the pattern, in milliseconds, of the hold tone using up to 10
whole numbers (off 1, on 1, off 2, on 2...) separated by commas.
Note
•
It is recommended that you set a value of 500 milliseconds or
more for the first value (off 1).
5.5.2 Tone Settings
Administrator Guide 217