Setting Video Options - Adobe 65029940 - Captivate - PC User Manual

CHAPTER 5
134
Adding audio and video
Automatically rewind the video after it stops playing.
Auto Rewind
Note: The Live video feed option is available only when you select Streaming Video.
If you selected Streaming Video or Flash Video Streaming Service, you must enter a number in the Buffer time
10
text box. (Buffer time is the amount of video that must be loaded before the video plays in the Adobe Captivate
project. The actual time it takes to stream video varies depending on the user's network bandwidth. Buffer time
must not exceed the total project time.)
You can choose the timing, transition, audio, and position settings (described in the following procedures)
11
now or after you have inserted the video.
To apply the settings or setting changes to all FLV files in your project, select Apply to all.
12
When you finish making your selections, click OK.
13

Setting video options

You can specify timing and transition options for your video when you insert the video file, or you can specify
them at any other time.
To set video options:
1 If you have already inserted the video, on the slide right-click the video frame and select Properties from the
pop-up menu.
2 In the Flash Video dialog box, click the Options tab.
In the Display for area, select from the following options:
3
Select specific time, and enter the time to play the Flash video for a specified time interval.
Specific time
Play the Flash video for the duration of the slide.
Rest of slide
Play the Flash video for the duration of the project.
Rest of project
Play the Flash video till its completion.
Duration of file
4 In the Appear after area, specify the number of seconds after which you want the video to appear.
5 If you want the video to continuously loop, click the Loop option.
The Pause slide till end of video is enabled if you select Rest of slide in the Display for options. Select this to
6
move to the next slide only after the Flash video completes playing.