Adobe 25520388 - Premiere Pro - PC Using Manual page 51

USING ADOBE PREMIERE PRO
Workflows and setup
3 (Optional. For an analog camcorder or VTR with an RS-422 or RS-232 port. Windows only) Connect the serial
device control port on the camcorder or VTR with the serial port on the computer or digitizer using the Pipeline
Digital ProVTR cable.
Note: Native serial device control is available in Windows only.
4 Connect the analog camcorder or VTR, or the digitizer, to the television monitor with an S-Video or RCA video
cable, and RCA or XLR audio cables.
5 Put the analog camcorder or deck into VTR or Play mode.
In Premiere Pro, select File >New > Sequence.
6
7 In the Available Presets area of the New Sequence dialog box, select the preset that matches the format of your A/D
converter. Do not match the source footage. For example, if you use a DV camcorder or A/DV converter to convert
the analog signal, choose a DV preset.
8 Type a name in the Sequence Name box. Then click OK.
Specify the default audio device
1 Choose Edit > Preferences > Audio Hardware (Windows) or Premiere Pro > Preferences > Audio Hardware (Mac
OS), and set the following options:
• Select an output device from the Default Device menu.
• Select a buffer size from the Buffersize menu (Mac OS).
2 Click OK.
Audio Hardware Settings (Windows only)
When you click ASIO Settings in the Audio Hardware panel of the Preferences dialog box, Premiere Pro opens the
Audio Hardware Settings dialog box, which contains an Input tab, and an Output tab.
Determines which connected audio device is routed into and out of Premiere Pro. If the device is an
Enable Devices
ASIO device, select the ASIO drivers for the device. If the sound card does not have manufacturer-supplied ASIO
drivers, choose Premiere Pro WDM Sound for this setting. To enable a device, be sure to install an up-to-date driver
for the device (Windows.) If you want to input more than two stereo channels or monitor 5.1 surround audio, the
device driver must comply with the ASIO (Audio Stream Input Output) specification. If it does not, only stereo inputs
and outputs are available, regardless of the number of hardware inputs and outputs that are connected.
Specifies the size of the buffer, in kilobytes, that Premiere Pro uses for recording audio.
Buffersize
Device 32-bit Recording/Playback
On the Output tab, check Device 32-bit Playback to enable 32-bit playback.
Note: If you have trouble hearing audio, see the TechNote:
Pro CS5, CS4, or CS3 on Windows."
Set up a USB microphone (Mac OS)
In the Audio Midi Setup application in Utilities, go to Audio > Open Aggregate Device Editor.
1
2 Check each of the following:
• Your USB microphone.
• An additional input device, for example, Line In.
• An output device
On the Input tab, check Device 32-bit Recording to record audio in 32-bit samples.
"No sound during playback of video or audio clips (Premiere
Last updated 1/16/2012
46