Adobe 25520388 - Premiere Pro - PC Using Manual page 317

USING ADOBE PREMIERE PRO
Effects and transitions
You apply the Color Correction effects to a clip the same way you apply all Standard effects. The effect properties are
adjusted in the Effect Controls panel. The Color Correction effects and other color effects are clip-based. However, you
can apply them to multiple clips by nesting sequences. For information about nesting sequences, see
on page 154.
Jeff Sengstack explains how to analyze clips for tonality issues
Pro: Color Correction and Enhancement.
Note: For more information, see
You can use the Broadcast Colors effect to adjust a clip's colors to broadcast standards.
When correcting color, it's useful to use the Vectorscope or waveform scopes (YC Waveform, RGB Parade, and YCbCr
Parade) to help you analyze the chroma and luminance in a clip. You can view a scope in a separate Reference Monitor
that's ganged to the Program Monitor so that you can check your video levels as you make adjustments.
For information about scopes, see
Correcting exposure: Overexposed image with the waveform in the upper limits of the IRE scale (left) and corrected image with the waveform
within 7.5 to 100 IRE (right)
More Help topics
"Fast Color Corrector effect" on page 356
Correct video color, easily
"Luma Corrector effect" on page 358
"Luma Curve effect" on page 359
"RGB Color Corrector effect" on page 360
"RGB Curves effect" on page 361
"Three-Way Color Corrector
"Video Limiter effect" on page 365
Set up a Color Correction workspace
The following is a suggested procedure for setting up your color correction workspace. It's meant only as a starting
point so you can configure the workspace to suit your style of working.
1 (Optional) Connect a calibrated NTSC or PAL monitor to your computer. If you're creating video for broadcast,
viewing the video on an NTSC or PAL monitor is essential for the most accurate preview.
2 Choose Window > Workspace > Color Correction.
"Broadcast Colors effect" on page 353.
"Using the Waveform monitors and
effect" on page 363
Last updated 1/16/2012
in this lynda.com video from his tutorial -- Premiere
vectorscope" on page 129.
312
"Nest sequences"