D-Link DSL-G604T User Manual page 7

Information you will need about your DSL-G604T ADSL Router:
Username
Password
LAN IP address
for the DSL-G604T
LAN Subnet Mask
for the DSL-G604T
Information you will need about your LAN or computer:
Ethernet NIC
DHCP Client
status
It is recommended that your collect and record this information here, or in some other secure place, in
case you have to re-configure your ADSL connection in the future.
Once you have the above information, you are ready to setup and configure your DSL-G604T ADSL
Router.
DSL-G604T 54Mbps Wireless ADSL2/2+ Modem/Router Manual
This is the Username you will be prompted
to enter when you access the DSL-G604T's
configuration screens using a Web browser.
The default Username is admin.
This is the Password you will be prompted to
enter when you access the DSL-G604T's
configuration screens using a Web browser.
The default Password is admin.
This is the IP address you will enter into the
Address field of your Web browser to
access the DSL-G604T's configuration
screens using a Web Browser. The default
IP address is 10.1.1.1.
This is the subnet mask used by the DSL-
G604T, and will be used throughout your
LAN. The default subnet mask is 255.0.0.0.
If your computer has an Ethernet NIC, you
can connect the DSL-G604T to this Ethernet
port using an Ethernet cable. You can also
use the Ethernet port on the DSL-G604T to
connect to other Ethernet devices, such as a
Wireless Access Point.
Your DSL-G604T ADSL Router is
configured, by default, to be a DHCP server.
This means that it can assign an IP address,
subnet mask, and a default gateway address
to computers on your LAN. The range of IP
addresses the DSL-G604T will assign are
from 10.1.1.2 to 10.1.1.254. Your computer
(or computers) needs to be configured to
Obtain an IP address automatically (that
is, they need to be configured as DHCP
clients.)
7
Record your info here.
Record your info here.