D-Link DSL-G604T User Manual page 35

DSL-G604T 54Mbps Wireless ADSL2/2+ Modem/Router Manual
Figure 4- 4. WAN Settings window for Dynamic IP Address
Click Apply to set the Dynamic IP settings for your DSL-G604T.
Static IP Address
Selecting this option in the WAN Settings will change your screen to look like the one seen below. A
Static IP address is used whenever a known static IP is assigned. The accompanying information such
as the Subnet mask, ISP Gateway Address and DNS servers should also be specified in order to be
able to connect. These are the servers would enable you to have access to other web servers. Valid IP
addresses range from 1.0.0.1 to 255.255.255.255. All information to be entered in this window must
be provided to you by your ISP.
35