D-Link DSL-G604T User Manual page 22

Windows Me
In the Windows task bar, click the Start button, point to Settings, and then click Control Panel.
1.
Double-click the Network and Dial-up Connections icon.
2.
In the Network and Dial-up Connections window, right-click on the Network icon, then select
3.
Properties.
The Network Properties dialog box displays with a list of currently installed network
4.
components. If the list includes Internet Protocol (TCP/IP), then the protocol has already been
enabled. Skip to step 3.
If Internet Protocol (TCP/IP) does not display as an installed component, click
5.
In the Select Network Component Type dialog box, select Protocol, and then click
6.
Select Microsoft in the Manufacturers box.
7.
Select Internet Protocol (TCP/IP) in the Network Protocols list, and then click
8.
You may be prompted to install files from your Windows Me installation CD or other media.
9.
Follow the instructions to install the files.
If prompted, click
10.
Next, configure the IP information:
1. In the Control Panel, double-click the Network and Dial-up Connections icon.
2. In Network and Dial-up Connections window, right-click the Network icon, and then select
Properties.
3. In the Network Properties dialog box, select TCP/IP, and then click
4. In the TCP/IP Settings dialog box, click the Specify IP address option.
5. Type in IP settings as follows, IP address: 10.1.1.2 and Subnet mask: 255.0.0.0.
6. Click
Windows 95, Windows 98 and Windows 98SE
First, check for the IP protocol and, if necessary, install it:
1.
In the Windows task bar, click the Start button, point to Settings, and then click Control Panel.
2.
Double-click the Network icon.
3.
The Network dialog box displays with a list of currently installed network components. If the
4.
list includes TCP/IP, and then the protocol has already been enabled. Skip to step 2.
If TCP/IP does not display as an installed component, click
5.
The Select Network Component Type dialog box displays.
6.
Select Protocol, and then click
7.
The Select Network Protocol dialog box displays.
8.
Click on Microsoft in the Manufacturers list box, and then click TCP/IP in the Network
9.
Protocols list box.
Click
10.
You may be prompted to install files from your Windows 95/98 installation CD. Follow the
11.
instructions to install the files.
Click
12.
Next, configure the IP information:
Open the Control Panel window, and then click the Network icon.
1.
Select the network component labelled TCP/IP, and then click
2.
DSL-G604T 54Mbps Wireless ADSL2/2+ Modem/Router Manual
to restart your computer with the new settings.
twice to confirm and save your changes, and then close the Control Panel.
to return to the Network dialog box, and then click
to restart the PC and complete the TCP/IP installation.
.
22
.
.
.
again.
.
.
.