Advanced Configuration; Upnp - D-Link DSL-G604T User Manual

Wireless adsl router

Hide thumbs Also See for DSL-G604T:

Table of Contents

DSL-G604T 54Mbps Wireless ADSL2/2+ Modem/Router Manual

Advanced Configuration

The Advanced tab has fifteen windows for you to view and configure: UPnP, Virtual Server, LAN

Clients, SNMP, Filters, Bridge Filters, Routing, DMZ, Firewall, RIP, PPP, ADSL, ATM VCC,

Wireless Management, and Wireless Performance.

UPnP supports zero-configuration networking and automatic discovery for many types of networked

devices. When enabled, it allows other devices that support UPnP to dynamically join a network,

obtain an IP address, convey its capabilities, and learn about the presence and capabilities of other

devices. DHCP and DNS service can also be used if available on the network. UPnP also allows

supported devices to leave a network automatically without adverse effects to the device or other

devices on the network. UPnP can be supported by diverse networking media including Ethernet,

Firewall, phone line and power line networking.

Figure 5- 1. UPnP window

To enable UPnP for any available connection, click to check the Enable UPnP selection box, select

the connection or connections on which you will enable UPnP listed under Available Connections

and click the Apply button.

Table of Contents