Snmp - D-Link DSL-G604T User Manual

DSL-G604T 54Mbps Wireless ADSL2/2+ Modem/Router Manual
Figure 5- 3. LAN Clients Window
To add a static IP address to the list of available IP addresses, type an IP address that falls within the
range a available IP addresses and click on the Add button. In the example above, available addresses
range from 10.0.0.1 to 10.255.255.254. Any addresses added will appear in the list of Static
Addresses available for advanced configuration. These addresses can then be used in the other Port
Forwarding, Access Control and Advanced Security menus. To delete an IP address from the list of
Static Addresses, click the Delete box for the address or addresses you want to eliminate and click on
the Apply button.
Dynamically assigned IP addresses may be reserved so that the LAN IP address for the device does
not expire. This will create a permanent entry for the device in the ARP table and in effect, it becomes
a static IP address. Click to check the Reserve box for the address or addresses you want to reserve
and click the Apply button. These reserved addresses will no longer be available for DHCP
assignment and will be listed in the Static IP Addresses table.

SNMP

This menu can be accessed directly by clicking on the SNMP button or hyperlink in the Advanced
setup menu. Simple Network Management Protocol (SNMP) is an OSI Layer 7 Application designed
specifically for managing and monitoring network devices. SNMP enables network management
stations to read and modify the settings of gateways, routers, switches, and other network devices.
Use SNMP to configure system features for proper operation, performance monitoring, and detection
of potential problems in the Router or network.
47