Smart Technologies SMART Board 480iv Configuration And User's Manual page 65

A P P E N D I X A
Remotely managing your interactive whiteboard system
Submenu setting
Power
Volume
Mute
Volume Control
Source
Emergency Alert
Alert Message
55
Description
Turns the projector on or puts it into Standby mode.
Select the Power ON or Power OFF button.
Adjusts the projector's volume from 0 to 40.
Turns the mute settings on or off. Select On to mute the projector's
sound and Off to turn off mute.
Enables volume control. Select On to enable volume adjustment and
select Off to disable volume adjustment if you prefer to use your audio
system or speaker (not included) controls.
Adjusts the input source to VGA1, Composite or S-Video.
Turns the on-screen alert broadcast message on or off. When
enabled, this message displays over the current projected image.
Displays an on-screen emergency notification message (maximum
60 characters).