Smart Technologies SMART Board 480iv Configuration And User's Manual page 6

I M P O R T A N T I N F O R M A T I O N
I
I M P O R T A N T
Use the instructions included with your SMART V25 projector to install your interactive
l
whiteboard and projector. The instructions in your SMART Board interactive whiteboard box
do not include instructions for installing the SMART V25 projector.
Make sure an electrical socket is near your SMART product and remains easily accessible
l
during use.
Using your SMART product near a TV or radio could cause interference to the images or
l
sound. If this happens, move the TV or radio away from the projector.
If you have peripheral devices that do not use a 4-pin mini-DIN connector or an RCA
l
composite video jack, or if your device has an audio connection that does not use RCA
jacks, you may need to purchase third-party adapters.
Keep your remote control in a safe place because there is no other way to access menu
l
options.
Put your SMART product into Standby mode before cleaning it.
l
Follow these guidelines to clean the projector:
l
Wipe the exterior of the projector with a lint-free cloth.
o
If necessary, use a soft cloth moistened with a mild detergent to clean the projector
o
housing.
Do not use abrasive cleaners, waxes or solvents.
o
Avoid touching the lens. If it is necessary to clean the lens:
o
Use liquids or commercial solvents (such as glass cleaners) to clean the lens,
o
but do not spray them directly on the system.
Use protective gloves and dip a lint-free cloth (such as Purestat PW2004) in an
o
anti-static solvent (such as Hyperclean EE-6310).
Gently wipe the lens from the center to the edge.
o
Disconnect the product from its power source when it's not used for a long period.
l
iv