Web Settings; Moving From One Menu To Another; Displaying The Setting Screens; Menu Operations - Panasonic AKHCU200 Operating Instructions Manual

Web settings

You can connect the unit and a computer, and configure various settings
from the Web browser screen .
Use a LAN cable (crossover cable) to directly connect the unit's LAN
connector for computer connections and the computer .
Set an IP address for the computer within the private address range
while ensuring that it is different from the address of the unit . Set the
subnet mask to the same address as the unit .
Note
Network settings of the unit (default settings)
z IP address: 192 .168 .0 .20
z
z Subnet mask: 255 .255 .255 .0
z
z Port number: 80
z
z Default gateway: 192 .168 .0 .1
z

Menu operations

Start the Web browser, and enter "http://192 .168 .0 .20" in the [Address]
box of the Web browser .
If the IP address is changed, the URL will also be different .
If this is the case, use the new IP address in the URL (http://new IP
address/) .
26
z Moving from one menu to another
z
To move from one menu to another, select the desired menu on the left
of the screen .
This is equivalent to "TOP MENU" displayed on the
picture monitor .
When either "OPERATION" or "MAINTENANCE" is
selected above, the corresponding menu items are
displayed here .
In the example shown, the OPERATION menu items
are displayed .
The setting screen corresponding to the menu item
selected here is displayed on the right .
z When using Internet Explorer, do not use [
z
z Displaying the setting screens
z
Select a menu item on the left of the screen to display the setting screen
corresponding to that item .
Back] or [ Next] .